auna IR-260 Mode D'emploi page 42

EN
42
Set the unit to automatically enter standby mode after
Energy-saving
a certain time in the menu/no network connection.
mode
Set the time (5/15 30 minutes) after which the unit
automatically enters standby mode when not in use. It
is also possible to disable this function.
You can use the Sleep Timer to set the time until the
Sleep timer
unit switches off automatically. You can select from
15, 30, 60, 90, 120, 150 and 180 minutes. Once the
sleep timer is activated, the corresponding icon and
the remaining minutes are displayed in the real top
corner of the screen. When the time is up, the unit will
automatically go into sleep mode.
You can set the music playback buffer time to 2/4/8
Buffer
seconds.
You can enable or disable the weather forecast for the
Weather
standby screen. To do this, first select the temperature
unit (°F or °C) and then proceed to set your location.
When you have activated this setting, the standby
screen alternately displays the time and the weather
forecast (the display changes every 10 seconds).
In Internet radio mode, it is possible to access the list
Local radio
of local stations directly. You can set your location
settings
manually or activate automatic location detection. The
device then determines your location based on the
IP address of your network. Press Local Station to go
directly to this station list.
Select the playback mode in the Media Center. You
Playback
can choose from Off (no repeat or shuffle), Repeat all,
setting
Repeat one, or Shuffle.