Cleaning And Maintenance - Steba VG 433 BIG Mode D'emploi

∙ Only use the device for food preparation
∙ Never use the device after a malfunction, e.g. when it was fal-
len down or was damaged in any way.
∙ To avoid any dangers must repairs, e.g. change of a defect po-
wer cord, only be done by our service or an authorised compa-
ny.
∙ Device gets hot. Only transport after it cooled down.
∙ If the appliance is used as a table top, it must be placed on a
even, stable and heat resisting surface (e.g. Not on painted fur-
niture) and keep away (min 70cm) of burnable materials (e.g.
curtains)
∙ Before the first use: Clean all parts and dry them afterwards. To
get rid of the new smell, heat up device for 15 minutes with top
closed. Apply a light coating of cooking oil to griddle before-
hand. After cooling, wash griddle in soapy water and dry.
Attention! Housing get hot, Risk of burns! Don´t place
∙
the device on a sensitive surface (e.g. painted furniture)
and keep distance of at least 70 cm to burnable materi-
als (e.g. curtains).
∙ The appliance should be supplied through a residual current
device (RCD) having a rated residual operating current not ex-
ceeding 30mA.
∙ The connector shall be removed before the appliance is cleaned
and that the appliance inlet must be dried before the appliance
is used again.

Cleaning and maintenance:

∙ The divice should be cleaned after each use.
∙ The worse the plate is cleaned, the worse the anti-adehesive
effect becomes.
∙ Unplug the device
∙ Never immerse the thermostat unit in water!
∙ The plate should be cleaned with detergent and a brush (place
the plate in some detergent water to solve heavy dirt)
∙ Wipe the hood and the housing with a damp cloth and a little
bit of washing-up liquid.
11