Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
How is the battery to be charged?
Using the base
•
Place the PORTABLE on its base.
•
Check to see if the electrical plug symbol is displayed on the portable screen and if the battery
symbol is moving (=battery charging).
Using the slave mini-USB connector of the portable
(The portable is out of its base)
•
Connect the power supply unit to the BA-USB adapter. See §"Appendix, BA-USB travel adapter".
•
Connect this assembly to the slave mini-USB connector located on the side of the portable. See
§"Portable connections".
•
Connect the power supply unit to the mains.
•
Check to see if the battery symbol is moving (=battery charging).
11.6.
ADJUSTING THE CONTRAST
If you wish to modify the contrast of the characters displayed on the screen, simply press and hold the "Point" and
"
" or "Point" and "
" keys as long as necessary to obtain a satisfactory contrast.
Page 44 / 52
INSTALLATION GUIDE
3 000 068 637 éd07 / 712
Publicité
Chapitres
Table des Matières
