Preparation To Use; Initial Checks; Supply Voltage; Storage - HT 52 Manual D'utilisation

HT52 - HT52/05

3 PREPARATION TO USE

3.1 Initial checks

This instrument was checked both
mechanically and electrically prior to
shipment. All possible cares and
precautions were taken to let you receive
the instrument in perfect conditions.
Notwithstanding we suggest you to check
it rapidly (eventual damages may have
occurred during transport – if so please
contact the local distributor from whom
you bought the item). Make sure that all
standard accessories mentioned in § 7.4
are included. Should you have to return
back the instrument for any reason please
follow the instructions mentioned in § 8

3.2 Supply voltage

The probe is supplied with a 1x9V alkaline
battery IEC6F22 included in packaging.
The "Low Battery" LED indicator light up,
when the battery is nearly discharged. In
case replace it following the instructions in
§ 6.2

3.3 Storage

In order to guarantee the accuracy of the
measurements, after a period of storage in
extreme environment condition, wait for
the time necessary so that the apparatus
returns to normal measuring conditions
(see § 7.3).
EN - 5