Johnson Controls ChillPAC Mode D'emploi page 63

Groupe refroidisseur avec compresseur a piston
Table des Matières

Publicité

Annexes
Press Arrow up (no. 4) until 1 has turned to 3, see Fig. 34.
Fig. 34
2.
Change the gas constant:
Press Arrow right (no. 1) – the bottom line is marked.
Change the digit to wanted number by pressing Arrow right (no. 1), Arrow down (no.
3) and Arrow up (no. 4), see Fig. 35.
Fig. 35
Confirm with Return (no. 2), see Fig. 36.
Fig. 36
Return (no. 2) always takes you up one level.
Change the following parameters in the same way:
+ 2.3.2 Blocking distance from 50 mm to 0 mm
+ 2.3.3 Time constant from 5 sec. to 1 sec.
+ 2.5.7 Level threshold from 200 mm to 150 mm
+ 4.1.1 Full area - confirm or change to 0 mm. Passcode for level 4.x.x = 4-3-4-2-4-1
+ 4.1.2 Empty Area from 280 mm to 260 mm.
After the last change, press Return (no. 2) until "STORE NO" is displayed, see Fig. 37.
Mode d'emploi - ChillPAC et LP ChillPAC Mk 3
010823 fr 06/2021
63/69

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Lp chillpac mk 3

Table des Matières