Publicité
Figure 14: Wiring Diagrams (continued)
Operating Instructions
to operate the Areamaster high lumen family of luminaires, ensure that power is live to the fixture after wiring and closing all wiring
compartments. 120–277 VAc or 125–300 Vdc is the acceptable range of voltages on these products.
Fuse Replacement
• Replace only with a fuse rating (ampere and volts) as specified on the fuse label (located inside the luminaire housing).
• the replacement fuse must be non-arcing (filled), non-indicating, and current limiting.
• the fuse is for supplementary protection only.
Appleton • 1.800.621.1506 • www.appletonelec.com
650525-001 Rev. F 04/02/19 • Page 14 of 17
Publicité
