Directiva de maquinaria, 2006/42/CE y Directiva de bajo voltaje, 2006/95/CE
Directive Machine, 2006/42/CE et Directive Basse Tension, 2006/95/CE
Fait à : Longpont sur orge
Lugar: Longpont sur Orge
Le: 07/07/2010
Fecha: 07/07/2010
Signataire et responsable de la documentation technique autorisé:
Signatario y responsable de documentación técnica autorizado:
Jean Christophe Declerck– Directeur Commercial
Jean Christophe Declerck - Director comercial
BRICO DEPÔT – 30-32, rue de la Tourelle, 91310 Longpont sur Orge - FRANCE
BRICO DEPÔT – 30-32, rue de la Tourelle, 91310 Longpont sur Orge - FRANCE
PONCEUSE A BANDE 900W
LIJADORA DE BANDA 900W
BELT SANDER 900W
3. Different types of sanding belt will allow the sander to
meet various needs. Different grades of sanding belt are
available, the higher grade number, the finer the grit. For
rough work start with a low grade of grit (i.e. 60 grade) and
change to a higher, finer grade (i.e. 100 or 120) for
finishing. If you use a fine grade for rough surfaces it will
soon clog and need frequent changing.
4. At all times, let the sander do the work-do not force it or
apply excessive pressure to the sanding belt or it could
wrinkle or tear. Preferably, use a light circular motion.
5. If the surface shows excessive making from the abrasive
motion, you may be using a grit which is too coarse or
applying too much pressure.
Declaración de conformidad
Déclaration de conformité
MAINTENANCE
Nous, BRICO DEPÔT – 30-32, rue de la Tourelle ,
Nosotros, BRICO DEPÔT – 30-32, rue de la Tourelle,
Remove the plug from the socket before carrying
91310 Longpont sur Orge - FRANCE
91310 Longpont sur Orge - FRANCE,
out any adjustment, servicing or maintenance.
Your power tool requires no additional lubrication or
Déclarons, sous notre propre responsabilité, que l'appareil suivant :
Declaramos que el producto:
maintenance. There are no user serviceable parts in your
Designación: LIJADORA DE BANDA 900W
Désignation: PONCEUSE A BANDE 900W
power tool. Never use water or chemical cleaners to clean
Référence : TTB290SDR
Modelo: TTB290SDR
your power tool. Wipe clean with a dry cloth. Always store
Código BRICO DEPÔT: 230359
Code BRICO DEPÔT: 230359
your power tool in a dry place. Keep the motor ventilation
Est conforme aux exigences essentielles listées ci-dessous:
Cumple con las directivas siguientes:
slots clean. Keep all working controls free of dust.
Directiva de compatibilidad electromagnética, 2004/108/CE
Occasionally you may see sparks through the ventilation
Directive Compatibilité Electromagnétique, 2004/108/CE
EN 55014-1: 2006+A1: 2009
slots. This is normal.
EN 55014-2:1997+A1: 2001+A2: 2008
EN 55014-1: 2006+A1: 2009
If the supply cord is damaged, it must be replaced by the
EN 55014-2:1997+A1: 2001+A2: 2008
EN 61000-3-2: 2006
manufacturer, its service agent or similarly qualified
EN 61000-3-3: 2008
EN 61000-3-2: 2006
persons in order to avoid a hazard.
EN 61000-3-3: 2008
EN 60745-1: 2009
ENVIRONMENTAL PROTECTION
EN 60745-2-4: 2009
EN 60745-1: 2009
EN 60745-2-4: 2009
Local Authority or retailer for recycling advice. For further
information visit www.recyclemore.co.uk
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
TTB290SDR
TTB290SDR
TTB290SDR