Description
1. rear panel
2. air inlet
3. front panel
4. operating panel (top)
5. air inlet
6. electrical cable with plug
7. wheels
8. waste pipe connection hot
air
9. water drainage point
Accessories
A. Outlet hose hot air
B. Connector window kit
C. Connector air
conditioner
D. Wall connector
E. Window kit
F. Remote control
G. Water drain hose
Installation
The EUROM PAC 7.2 and PAC 9.2 are mobile air
conditioning/ dehumidifying units that can be
moved from room to room. Install as follows:
Remove all packaging material, keep it away
from children and ensure that the unit
remains in an upright position.
Before use, check that all accessories are
present and that there is no damage to the
accessories or the unit itself. Do not use a
damaged unit; take it back to your supplier!
Place the unit on a sturdy, flat, dry and
horizontal base near an electrical socket and a discharge point for hot air, e.g. a
window that can be opened slightly. Make sure that the unit has at least 30 cm
of free space on all sides and take all safety instructions into account.
side
20
front
back