Marantz professional PMD-750TA Guide D'utilisation page 9

Pairing the Transmitter and Receiver
Pairing 1 transmitter with the receiver (automatic):
1. Turn on the receiver and it will enter pairing mode.
2. Turn on the transmitter and it will automatically pair
with the receiver.
Pairing 2 transmitters with the receiver (automatic):
1. Turn on the receiver and it will enter pairing mode.
2. Turn on the transmitters and they will enter pairing mode.
The first transmitter will automatically pair with the
receiver.
3. Once Transmitter 1 is paired, Transmitter 2 will pair to the
receiver. When Transmitter 2 is paired to the receiver, the
transmitter display will show "2 TX".
4. The receiver display will show "Mono" or "Stereo". Press
Enter to select it and use the navigation buttons to
switch between "Mono" and "Stereo". Press Enter to
confirm the choice.
Pairing 1 or 2 transmitters to the receiver (manual)
1. Turn on the receiver and transmitter(s).
2. Press the navigation buttons to move the cursor to the
TX icon. Once TX is highlighted, the icon will display
PAIR. On the transmitter(s), press Enter to go into
pairing mode and the icon will flash to wait for the
receiver to pair. Once paired, the icon will be lit solid.
3. Press Enter on the receiver to go to the Output mode
and use the navigation buttons to switch between
stereo and mono. Press Enter to confirm the choice.
Note: The Output mode is automatically set to mono
when only one transmitter is paired.
9