Klarstein EZ DRY Mode D'emploi page 26

EN
26
4 Start/stop device
Press the START/STOP button and the dryer starts after 2 seconds. Press the
START/STOP button during operation to stop the appliance. In this state,
garments can be added or reduced. D
Note: Hot steam escapes when the door is opened!
Press the START/STOP button again to resume operation. The "Start/Stop"
button is the switch between starting and stopping the dryer. If you press the
START/STOP button immediately after switching on, the dryer runs according
to the intelligent program.
5 Wrinkle Guard function (crease protection)
After selecting the programme or while a programme is running, press the
WRINKLE GUARD key. The time in the time display increases by 10 minutes
and the wrinkle guard function is active. During operation, the function can be
activated or deactivated at any time by pressing the WRINKLE GUARD key.
6 Child lock
When the dryer is running, press the WRINKLE GUARD and PRESET buttons
for 2 seconds until a signal sounds. The parental control indicator lights up
on the display and all keys are locked. Press WRINKLE GUARD and PRESET
again to deactivate the child lock.