Operation Instruction - BWT MP-IHP 50 Manuel D'utilisation

VI. Operation instruction
SYMBOL
Note:
You may set the desired water temperature from 12 to 40℃.
The center of the screen shows the inlet pool temperature, when the up
and down keys are pressed, the digital flashing displays the set
temperature.
After you turn on the heat pump, the fan will start to run in 3 minutes. In
another 30 seconds, the compressor will start to run.
During heating, the
light.
DESIGNATION
Power ON/OFF Press to power on or off the heat pump
Press to select Smart/Silence mode
Mode Smart mode:100%-20% capacity
Silence mode:80%-20% capacity
Heat/Cool/Auto Press to shift among cooling, heating and auto
Up/ Down Press to set desired water temperature
will be light. During cooling,
11
OPERATION
will be