BWT MP-IHP 50 Manuel D'utilisation page 34

For power supply: 230V 50Hz
Power Supply
230V 50Hz
Earthing
Note：
Must be hard wired, no plug allowed.
The swimming pool heater must be earthed well.
3. Electric Wiring Diagram
Options for protecting devices and cable specification
MODEL
Rated Current
A
Breaker
Rated Residual
Action Current
mA
Fuse A
Power Cord (mm
Signal cable (mm
Note: The above data is adapted to power cord ≤ 10m. If power cord is＞10m, wire
diameter must be increased. The signal cable can be extended to 50m at most.
4. Installation instruction and requirement
The heat pump must be installed by a professional team. The users are not qualified to
install by themselves, otherwise the heat pump might be damaged and risky for users'
safety.
Distribution Box
(Customer prepare)
Breaker
MP-IHP 50 MP-IHP 62
8.0
30
8.0
2
) 3×1.5
2
) 3×0.5
※ Above data is subject to modification without notice.
Power Cord
Fuse
MP-IHP 80
8.0 9.5
30 30
8.0 9.5
3×1.5 3×1.5
3×0.5 3×0.5
8
Swimming Pool Heat Pump Wiring Board
MP-IHP 96 MP-IHP 125
11.5 15.0
30 30
11.5 15.0
3×2.5 3×2.5
3×0.5 3×0.5
MP-IHP 165
20.5
30
20.5
3×4
3×0.5