Installation Instruction - BWT MP-IHP 50 Manuel D'utilisation

V. Installation instruction
1. Drawing for water pipes connection
：
(Notice The drawing is just for demonstration, and layout of the pipes is only for reference.)
2. Connecting your power wire
(Note: please open the back panel for power connection. The operation is the same as above.)
① Please use cross screwdriver to take off the 2 screws
at the bottom of the right side panel. Take off the lower
half of the panel.
② Unscrew the 3 screws on the cover of the electrical box.
③ Connect the terminals according to the electrical diagram.
7