Disposal; Ban On Tuning; Transport And Shipping - imtech iMatJet Mode D'emploi

Removal/replacement of the protective grille
The warnings on page 9 for "replacing
the drive screw" apply. Proceed as with
"replacing the propeller, steps "
Then do the following:
Unscrew the propeller [33] counterclockwise (to the

left) from the motor shaft [35].
Then unscrew the lock nut M 5

shaft.
Now you can turn the 3 Allen head screws

downwards counterclockwise using a 2.5 mm Allen
key and remove the protective grille
The protective grille is installed in reverse order.

Finally push and lock both batteries
seals [25] into the motor housing
Disposal and recycling
As a consumer, you are legally obliged to
properly dispose of old electrical
appliances. The same applies to batteries.
Regional recycling centers serve as the
first point of contact. The electrical
components of the iMatJet ® must not be
disposed of with residual waste. The
batteries of the iMatJet ® must be treated as
dangerous goods and are therefore subject
to special labeling requirements.
10
Ban on tuning
Do not make any technical alterations to your
iMatJet ® . Any manipulation to increase
performance or speed can have serious legal
and security implications for you.
Possible legal repercussions:
The manufacturer does not assume any liability or
warranty.
[34] from the motor
Criminal law repercussions cannot be ruled out. For
example, you may be charged with the offense of
negligent bodily harm.
[36]
Possible technical repercussions:
[31].
 Technical modifications impair functionality and can
lead to defects or breakage of components.
 Motor and batteries might suffer overload and overheat.
[23] with clean
Consequence: Irreparable damage and fire hazard.
[20]..
The batteries must be disposed of by the seller or
manufacturer.
Contact us via email at service@imatjet.comwith
your request, please state the article number.
If you remove the batteries
housing [20], a label with the article number can be
found on one side.
Transport
Remove the batteries before transporting
your iMatJet
By car or train
Transport your iMatJet
delivery [11].
Remove the batteries of the motor housing
transport
protective caps [27].
Place the batteries in the trolley together with the iMatJet
Stow the trolley safely in your vehicle / on the train.
By plane
Package the iMatJet
to avoid damage in transit.
During transport by plane, the batteries of the motor
housing must be transported as dangerous goods.
For this purpose, they must be specially labeled. Ask
your airline about this and also about regulations for the
transport of sports equipment.
Shipping the batteries
Never ship the batteries
yourselves, as these fall into the
category of dangerous goods.
As the batteries can heat up or catch fire under certain
[23] from the motor
conditions, only ship the batteries through your specialist
dealer.
If you have any questions, please contact our service.
® .
® in the trolley included in the scope of
[23]
[20] and secure the contacts [26] with the
® carefully in the trolley [11]
[23]
before
.
®