Caso FastVac 4008 Mode D'emploi Original page 48

18.12 Storage
Store the unit in its upright position, out of the reach of children.
► Always unplug the appliance from its outlet immediately after using and before cleaning.
► For the correct storage, please slightly close the cover, do not lock, it will deform the
gaskets and affect the machine function.
19 Maintenance
Exchange upper/lower gasket
Exchange sealing bar
Turn off the device using the main switch. Let the device cool down completely.
Open lid of the device.
Loose the clips on the right and left of the sealing bar gently with a knife. Carefully take the
sealing bar out of device by using a blunt object.
PLEASE NOTE
Take a new sealing bar and press the sealing bar into
the trough again and check the position. Replace the
clips on left and right side.
Exchange of teflon tape
Turn off the device using the main switch. Let the device
cool down completely.
Turn off the device using the main
switch. Let the device cool down
completely. Open lid of the device.
Take the upper/lower gasket out of the
trough in the cover of device/from the
trough around vacuum chamber.
Insert the new gasket and push it with
your fingers into the trough.
48