Caso FastVac 4008 Mode D'emploi Original page 46

18.6 Shut down function when vacuum is not reached
If it's not reach the required vacuum for some unknowable reason, the vacuum system will
shut automatically after 60 seconds, in this situation, please check if the bag is leak, or not
placed properly or any other reasons.
18.7 Vacuum package in a Canister
Wipe canister cover, canister base and ensure they are clean and dry.
Put the items into the canister and do not fill up too full so that the cover can be in good
contact with the canister bowl rim. Close the cover.
Insert one end of the hose into the air intake and another end of the hose into the center
hole of the canister cover.
Press the "Vakuumbehälter" (Canister) button to start vacuuming. To ensure there is no air
leaking between the cover and the canister, use your hand to push down the cover at the
beginning of the vacuuming work. The machine will stop automatically when enough
vacuum pressure is achieved.
Take out the hose tube from the canister or bowl immediately first after the job is
completed.
18.8 Marinate with a Canister
Wipe canister cover, canister base and ensure they are clean and dry.
Put the items into the canister and do not fill up too full so that the cover can be in good
contact with the canister bowl rim. Close the cover.
Insert one end of the hose into the air intake and another end of the hose into the center
hole of the canister cover.
to the type of food.
Check the LED
status of
"vacuumstrengh"
and make sure if it
is in "normal"
setting.
Close the lid and
press down firmly
on the front handle
Check the LED
status of
"vacuumstrength"
to confirm the
desired vacuum
pressure "normal"
(normal) or
"schonend"
(gentle) according
46
.