Switching The Device On/Off; Lawn Care Tips - FUXTEC E146C Mode D'emploi

Original User Manual FUXTEC 40V Battery Lawn Mower E146C

Switching the device on/off

Insert the batteries in the rails provided. Then insert the security key. Only then can you operate the
safety button and the on/off hadle. The device now turns on. When you
release the on/off handle, the device stops working. Attention: Cutting tools can still run on
minimally.
After the switching on , pull back On/Off switch towards the handle. Then pull the drive bail toward
the handle to engage the drive transmission
Removing and emptying the grass catcher
• If the grass catcher bag is full and should be emptied immediately.
• Switch the motor off.
• Wait until the cutter bar stops.
• Lift the discharge flap.
• Remove the grass catcher.
• Lower the discharge flap down again.
• Empty the grass catcher.
• Before hooking, remove any obstructions from the cutting area.
Working without the grass catcher
When working without the grass catcher, the mowed grass is ejected directly downwards.

Lawn care tips

Here are some tips to help you keep your lawn healthy and ensure even growth:
A lawn consists of different types of grass. Frequent mowing promotes the growth of grass,
this leads to strong roots and a firm grass leaf. If you rarely cut the grass, strongly growing grass
species and other weeds (such as clover, daisies) will develop.
The average height of a lawn is about 4-5 cm. Only a third of the total height should be mowed;
therefore, cut 7-8 cm of grass to the average height.
32