AVM FRITZ!DECT 100 Mode D'emploi page 5

FRITZ!DECT Repeater 100 is registered
with the base station. The connection has
been established when the "DECT" LED
lights up.
If "DECT" continues to fl ash,
registration was not successful.
Remove FRITZ!DECT Repeater 100
from the power outlet and repeat
the registration process.
Status
DECT DECT
Installing
1. After registering with the base station,
remove FRITZ!DECT Repeater 100 from
the outlet.
2. Insert the repeater in an outlet at the
location where you would like to expand
the range of your cordless telephone
coverage.
FRITZ!DECT Repeater 100 automatically
re-registers with the base station. The
"DECT" LED lights up.
If "DECT" continues fl ashing, the
repeater is not able to connect with
the base station. See the instructions
on the next page and test an outlet
located closer to the base station.
FRITZ!DECT Repeater 100 is now ready
for operation. When you leave the range
of the base station's coverage, the
telephone automatically switches to the
coverage area of your repeater.
8
Installation Site Tips
 Select a site with a good connection
to the base station for your FRITZ!DECT
Repeater 100.
Before registering the repeater, use a
cordless telephone to test where the
base station has strong coverage. This is
the area where calls can be conducted
without any interference or static.
 If you use multiple FRITZ!DECT Repeaters,
we recommend placing them at least 10
meters away from each other.
 If at all possible there should be no
barriers between FRITZ!DECT Repeater
100 and the base station, such as thick
walls, radiators or high-humidity zones
(damp walls, drying racks).
Using Multiple FRITZ!DECT
Repeaters
You can register up to six FRITZ!DECT Re-
peaters with a FRITZ!Box or with other DECT
base stations.
Using multiple FRITZDECT Repeaters you
can extend the range of your base station
in various directions, even over multiple
stories of a building.
If you move around during a telephone
call, your cordless telephone automatically
switches between the transmission area of
the base station and the areas covered by
the repeaters without interrupting your call.
9