Sony VPL-FH500L Guide De Référence Rapide page 43

Adjusting the Focus, Size, and Position of the Projected image
Focus
When attaching the Electric
focus lens
Press the FOCUS key on the
projector or the Remote
Commander then press the B/
bkey (or V/v key) to adjust
the focus.
When attaching the Manual
focus lens
Turn the Focus Ring to adjust
the focus.
Adjusting the tilt of the projector with the rear feet (adjustable)
When the projector is installed on an uneven
surface, you can adjust using the rear feet
(adjustable). To correct any trapezoidal
distortion of the projected image, use the
Keystone feature.
You can also broaden the adjustment range
by removing the nuts from the rear feet
(adjustable).
Size (Zoom)
When attaching the Electric
zoom lens
Press the ZOOM key on the
projector or the Remote
Commander then press the B/
bkey (or V/v key) to adjust
the size.
When attaching the Manual
zoom lens
Turn the Zoom Ring to adjust
the size.
Position (Lens shift)
Press the SHIFT key on the
projector or the Remote
Commander then press the V/v/
B/b key to adjust the position.
To return the lens to the center
position of the projected image
Press the RESET key on the
Remote Commander while
adjusting.
Projecting an Image
13
GB