The IPv4 Subnet Mask is a network segment where IP
addresses with identical network addresses are used. The
standard value here is usually 255.255.255.0.
At Main NIC / Default Route you can choose which LAN
port is used as default port (If "Net Fault-tolerance" is
activated the other port stays standby until the connection
via the main port is lost.
MA-4101-001-Bedienungsanleitung-TVVR40000.indb 10
To determine the value for the IPv4 Default Gateway, use
one of the computers connected to the network with
Windows. Call up "Run" in the start menu. Enter "cmd" in the
new window, then "ipconfig" in the prompt which follows.
12
12
Enter the default gateway value in the recorder screen.
All hard drives which are to be used for recording must be
initialized beforehand. To initialise the hard drives, tick the
corresponding drive.
15
15
The DNS Server translates an Internet address into an IP
address. Enter the default gateway value under Preferred
DNS Server.
13
13
Click Init, then confirm the successful initialisation with OK.
Exit the screen by pressing OK, then go to the next screen
by pressing Next.
16
14
17
35
16.09.2010 11:18:8