BEHA Amprobe DR 100 Mode D'emploi page 8

References and symbols marked
on the instrument:
Warning of a potential danger, com-
ply with instruction manual.
Caution! Dangerous voltage. Danger
of electrical shock.
Reference. Please use utmost attenti-
on.
Continuous double or reinforced in-
sulation complies with category II
IEC61140.
Symbol for the marking of electrical
and electronic equipment (WEEE
Directive).
Conformity symbol, the instrument
complies with the valid EU directives.
CAT III
Measurement Category III is applicable to test
and measuring circuits connected to the distri-
bution part of the building's low-voltage Mains
installation. Examples are measurements on
distribution boards (including secondary
meters), circuit-breakers, wiring, including
cables, busbars, junction boxes, switches,
socket-outlets in the fixed installation.
The instruction manual contains infor-
mation and references, necessary for
safe operation and maintenance of the
instrument.Prior to using the instru-
ment (commissioning / assembly) the
user is kindly requested to thoroughly
read the instruction manual and comply
with it in all sections.
Failure to read the instruction manual
or to comply with the warnings and re-
ferences contained herein can result in
serious bodily injury or instrument da-
mage.The respective accident preventi-
on regulations established by the pro-
fessional associations are to be strictly
enforced at all times.
Brief Description /
Scope of Supply
The handheld BEHA-AMPROBE Phase Rotation
Indicators are applicable in various areas and
different mains voltage. The test instruments
are built in compliance with the most recent
safety regulations and ensure safe and reliable
testing.
•
Display of all three phases via glow lamps
•
Display of phase rotation direction via
glow lamps
•
Including measurement leads with safety
plugs
•
Voltage range 200 ... 440 V
•
Frequency Range 50 ... 60 Hz