BEHA Amprobe DR 100 Mode D'emploi page 12

Maintenance
When using the instrument in compliance
with the instruction manual no special main-
tenance is required.
Cleaning
If the instrument is dirty after usage, it is ad-
vised to clean it by using a humid cloth and
mild household detergents. Never use acid
detergents or dissolvants.
Specifications
Phase indication:
Rotary field indication:
Voltage range:
Frequency:
Operation:
Current pick-up:
Current to earth:
Measurement Category:
Overvoltage class:
Safety after:
Pollution degree:
Temperature range:
Protection class:
Protection:
Dimensions:
Weight:
24 month warranty
BEHA-AMPROBE instruments are subject to
strict quality control. However, should the in-
strument function improperly during normal
use, you are protected by our 24 month war-
ranty (valid only with invoice or receipt).
Within the warranty period we will decide
whether to exchange or repair the defective
instrument. We will repair free of charge any
defects in workmanship of materials, provi-
ded the instrument is returned unopened
and untampered with.
Damages due to dropping or incorrect hand-
ling are not covered by the warranty. If the
instrument breaks down following expiry of
warranty our service department can offer
you a quick and economical repair facility.
Subject to technical changes without notice !
3 glow lamp L1, L2, L3
2 glow lamp R, L
200 ... 440 V / 3~
50 ... 60 Hz
continuous operation
< 5 mA
< 3.5 mA
CAT III, max.400 V to
ground
61010-1; 610101-2-030;
DIN VDE 0413-7;
EN 61557-7
2
0 ... 40° C
II
IP 40
approx. 110 x 58 x
24 mm
approx. 150 g