Menu Features And Functions - Telefunken L26H135U3 Mode D'emploi

For your viewing requirements, you can set the related mode option. Picture mode can be
Mode
set to one of these options: Cinema,Game,Sport,Dynamic and Natural.
Contrast Sets the lightness and darkness values of the screen.
Brightness
Sets the brightness value for the screen.
Sharpness Sets the sharpness value for the objects displayed on the screen.
Colour Sets the colour value, adjusting the colors.
Power Save To set Power Save Mode as Eco, Picture Off and Disabled. See the section, "Environmental
Mode Information" in this manual for further information on Power Save Mode.
This setting controls the backlight level and it can be set to Auto, Maximum, Minimum and
Backlight
Eco Mode. Backlight function will be inactive if Power Save Mode is set to On. Backlight
(optional)
cannot be activated in VGA, Media Browser mode or while the picture mode is set to Game.
If the broadcast signal is weak and the picture is noisy, use Noise Reduction setting
Noise
to reduce the noise amount. Noise Reduction can be set to one of these options: Low,
Reduction
Medium, High or Off.
Dynamic You can change contrast rate by using dynamic contrast function. Dynamic contrast can be
Contrast set to one of these options: Low, Medium, High or Off.
Colour Temp Sets the desired colour tone.
Sets the picture size to Auto,16:9, Subtitle,14:9, 14:9 Zoom, 4:3 or Cinema. Auto (Only
Picture Zoom
available in Scart mode with SCART PIN8 high voltage/low voltage switching).
HDMI True
While watching from HDMI source, this feature will be visible in the Picture Settings menu.
Black
You can use this feature to enhance blackness in the picture.
(optional)
Film Mode
Films are recorded at a different number of frames per second to normal television programmes.
Turn this feature on when you are watching films to see the fast motion scenes clearly.
(optional)
Skin Tone
Adjust the desired skin tone.
Colour Shift Adjust the desired colour tone.
Press OK button to edit RGB gain. You can configure the colour temperature values using
RGB Gain
the RGB Gain feature.
Reset Resets the picture settings to factory default settings.
Autoposition
Automatically optimizes the display. Press OK to optimize.
(in PC mode)
H Position (in
This item shifts the image horizontally to right hand side or left hand side of the screen.
PC mode)
V Position (in
This item shifts the image vertically towards the top or bottom of the screen.
PC mode)
Dot Clock (in Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive
PC mode) presentations like spreadsheets or paragraphs or text in smaller fonts.
Depending on the resolution and scan frequency that you input to the TV set, you may see
Phase (in PC
a hazy or noisy picture on the screen. In such a case you can use this item to get a clear
mode)
picture by trial and error method.
While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will
be added to the Picture Settings while in PC mode.

Menu Features and Functions

Picture Menu Contents
Advanced Settings
English - 44 -