Remote Control Button Functions - Normal Remote (Tv) - Telefunken L26H135U3 Mode D'emploi

Remote control button functions - Normal remote (TV)

1. Standby
2. TV- Channel list
3. Volume Up/Down
4. Menu on-off
5. OK / Confirm / Hold (in TXT mode)
6. Back / Return / Index (in TXT mode)
7. Internet
8. Youtube / My button 1 (*)
9. My button 2 (**)
10. Coloured buttons
11. Current language (in DVB channels) / Mono-
stereo Dual I-II
12. Rapid reverse (in media browser mode)
13. Pause(in media browser mode) / Timeshift
recording
14. Programme recording
15. Play ((in media browser mode)
16. Stop (in media browser mode)
17. Rapid advance
18. Subtitle on-off
19. Image size / Expand (in TXT mode)
20. Teletext / Mix
21. Media Browser
22. EPG
23. Exit
24. Navigation buttons
25. Quick Menu
26. Info / Reveal (in TXT mode)
27. Programme up/down
28. Mute
29. Previous programme
30. Numeric buttons
31. Source selection
Using My button 1 (*)
This button's main function is to run Youtube link.
However, if you want to change this function, you
can press MY BUTTON 1 for five seconds when on a
desired source, channel or link, until the "MY BUTTON
IS SET" message is displayed on the screen. This
confirms that the selected MY BUTTON is now
associated with the selected function. Note that if
you perform first time installation, MY BUTTON 1 will
return to its default function.
NOTE: The Remote Control range is approximately
7m / 23ft.
Note : My button 1 cannot be used while in portal
mode.
1. Using My Button 2 (**)
This button's main function is to switch between
DVB-T, DVB-C and DVB-S broadcasts. However,
if you press MY BUTTON 2 for five seconds, you
can set a function to it as described in My Button 1.
Note that if you perform first time installation, MY
BUTTON 2 will return to its default function.
English - 37 -