Superior SVEVA Instructions Pour L'installateur page 13

Fasten the side panel [2] to the stove with the rear
bracket [F] using the screw [E] and washer [A] provided
in the kit. (Fig. 4)
Now install the other side panel, repeating the above
steps in the same order.
Offer up the trim [4] to the side panel [2] and fasten it
to the rear bracket [F] using two screws [E] provided in
the kit. (Fig. 5)
Tighten the screws [E] until the trim [4] is
resting against the side panel [2]; do not
overtighten otherwise the majolica enamel
could be damaged.
Fit the top plate [1] after ensuring that the humidifier
(optional) is properly inserted into the relative space (see
par. "HUMIDIFIER" in the booklet giving instructions
for INSTALLATION, USE AND MAINTENANCE). (Fig. 6)
For the model SVEVA THERMO the top plate
[1] must not be installed because it is not
necessary.
Fig. 4
Fig. 5
2
Fig. 6
1
H07024030 / DT2000551-01
E
4
E
A
F
DT2032773-0
F
DT2032774-0
DT2032296-00
13