Range Hood Use; Range Hood Controls; Operating The Blower - Whirlpool JENNAIR JXW9030HP Instructions D'installation Et Guide D'utilisation Et D'entretien

The range hood is designed to remove smoke, cooking vapors
and odors from the cooktop area. For best results, start the hood
before cooking and allow it to operate several minutes after
the cooking is complete to clear all smoke and odors from the
kitchen.
The hood controls are located on the right-hand underside of the
range hood.
A
A. Infrared lamp switch
B. LED light switch
C. Blower control switch
12

RANGE HOOD USE

C
B

Range Hood Controls

Operating the lights
1. Turn the light switch to the Night position to use the range
hood lights as a night light.
2. Turn the light switch to the High position to turn the range
hood lights On.
3. Turn the light switch to the Off position to turn the range
hood lights Off.

Operating the blower

1.
hood on Low.
2. Turn the blower switch to the second position to turn the
range hood on Medium.
3. Turn the blower switch to the third position to turn the range
hood on Medium - High.
4. Turn the blower switch to the High position to turn the range
hood on High.
5. Turn the blower switch to the Off position to turn the range
hood blower Off.
Operating the heat lamp
NOTE: Heat lamp bulbs should be rated to a maximum of 175 W
each.
WARNING
Food Poisoning Hazard
Do not let food sit for more than one hour before or
after cooking.
Doing so can result in food poisoning or sickness.
1. Turn the heat lamp switch to the High position to turn the
heat lamps On.
2. Turn the heat lamp switch to the Off position to turn the heat
lamps Off.