Publicité
Les langues disponibles
Les langues disponibles
6. TROUBLESHOOTING
You can solve many common problems easily, saving you the cost of a possible service call.
Try the suggestions below to see if you can solve the problem before calling the servicer.
PROBLEM
The appliance does not
operate
The appliance is not
cold enough
The light does not work
The appliance seems
to make too much
noise
The door will not close
properly
The control board
doesn't work
Display error on screen
•
Not plugged in
•
The appliance is turned off
•
The circuit breaker tripped or a blown fuse
•
Check the temperature control setting
•
The ambient temperature requires a temperature readjustment
•
External environment may require a higher setting
•
If the ambient temperature is> 25 ° C, your appliance can only
cool down by 10 ° C below the ambient temperature.
•
The door is opened too often
•
The door is not closed completely
•
The door gasket does not seal properly
•
Not plugged in
•
The circuit breaker tripped or a blown fuse
•
The bulb has burned out
•
The light switch is "OFF": press the "light" button to activate the
function
Contact you after sales service
•
The rattling noise may come from the flow of the refrigerant,
which is normal
•
As each cycle ends, you may hear gurgling sounds caused by
the flow of refrigerant
•
Contraction and expansion of the inside walls may cause
popping and crackling noises
•
The appliance is not level
•
Check that the shelves are correctly installed
•
The thermoelectric cooler is not level
•
The door was reversed and not properly installed
•
The gasket is dirty
•
The shelves are out of position
•
The control panel is down
•
Problem with printed circuit boards
•
Problem with power supply
Contact your after sales service
•
Poor screen quality
•
Temperature value does not appear
Contact your after sales service
21
POSSIBLE CAUSE
Publicité
