Publicité
Les langues disponibles
Les langues disponibles
Caution! Cleaning and servicing
▪ Before carrying out servicing, switch off the power supply and disconnect the
appliance.
▪ When cleaning the appliance, do not use metal objects, steam systems, volatile
fluids, organic solvents or abrasive substances.
▪
Do not use sharp or pointed objects to remove ice. Use a plastic scraper.
Important information concerning installation
▪ To ensure proper electrical connection, follow the recommendations given in
the present manual.
▪ Unpack the appliance and visually check that it is not damaged. Do not connect
a damaged appliance. Inform your retailer or point of sale of any damage. In
such a case, keep the packaging.
▪ Proper air circulation is necessary to avoid overheating. To ensure sufficient
ventilation, observe the installation recommendations provided.
▪ In order to avoid fire risk, wherever possible, ensure that the appliance is not in
contact with walls or with any hot element (compressor, condenser). Observe
the installation recommendations.
▪ The appliance should not be placed close to radiators or cooking hot plates or
gas rings.
▪ Check that electrical sockets remain accessible when the appliance is installed.
▪ The appliance has to be installed in a room where ambient temperature is
between 20 and 25°C. Over or under this recommended temperature range,
performances may be affected.
▪ This appliance is not intended to be used in an unheated room (garage...), you
have to place in an ambient room.
▪ This product is designed for maximum cooling to 15°C below ambient
temperature.
▪ When positioning the appliance, ensure the supply cord is not trapped or
damaged.
Power saving
To limit the electricity consumption of your appliance:
▪ Install it in an appropriate place (see "Installing your appliance").
▪ Leave the doors open as little time as possible.
▪ To ensure that the appliance operates properly, clean the condenser regularly
(see "Maintenance").
▪ Regularly inspect the door seals and ensure that they are still closing properly.
If this is not the case, contact your after-sales service.
15
Publicité
