claber Dual Select Mode D'emploi page 9

Batteries installation
Notes:
• Use only AA 1.5V (LR6) alkaline batteries, and replace them at the
beginning of each watering season.
• The battery symbol
- when program/manual settings are visible; replace batteries
immediately to retain the programs.
- when no settings are visible; replace batteries immediately and
reprogram the timer.
• When the batteries are dead, the timer will shut off all functions
automatically and close the valve.
• The current programming remains stored while the batteries
are being replaced, for a maximum duration of 2 minutes. If the
memorized data is lost, the timer must be reprogrammed.
• Always remove the batteries if the timer will not be used for ex-
tended periods.
• Make sure to properly dispose dead batteries according to your re-
gional waste management specifications.
blinks on the display in two scenarios:
US
7