Delayed Start Programming Example - claber Dual Select Mode D'emploi

Programming
US

DELaYED StaRt PRogRammINg EXamPLE

At 8:30 pm you are programming your timer to water 10 minutes every 12
hours, starting from 11:30 pm.
- Press the "M" button repeatedly to set the watering duration (i.e. 10
minutes)
- Press the "F" button repeatedly to set the watering frequency (i.e. 12
hours)
- Press the "A-START" 4 times
By doing so, on line A a watering cycle of 10 minutes will start automati-
cally in 3 hours and repeat every 12 hours (at 11:30 am and 11:30 pm in
the next day, and so on).
Likewise, when programming line B to water for 5 minutes every 8 hours,
starting immediately, proceed as follows:
- Press the "M" button repeatedly to set the required watering duration
(i.e. 5 minutes).
- Press the "F" button repeatedly to set the required watering frequency
(i.e. 8 hours).
- Press the "B-START" button once within 10 seconds.
By doing so, on line B a watering cycle of 5 minutes will start immediately
(i.e. at 8:30 pm) and repeat every 8 hours (at 11:30 am and 11:30 pm in
the next day, and so on).
16