Rain Sensor Status Display - claber Dual Select Mode D'emploi

Operation with Rain Sensor
US

RaIN SENSoR StatUS DISPLaY

rain rain
rain rain
rain rain
rain rain
rain rain
rain rain
rain rain
rain rain
20
h
h
h
h
No rain sensor installed, or
if installed, cup contains less
than 0.17 ounces (5 mm)
rainwater.
h
Rain sensor contains
at least 0.17 ounces
h
(5 mm) rainwater and
communicates this status
to the timer, which is
h
currently inactive (valve
m
closed).
Rain sensor
at least 0.17 ounces
(5 mm) rainwater and
m
communicates this status
to the timer, which is
currently active
m
open).
m
h
only with RF Rain
Sensor.
The timer has received
no communication from
the RF sensor for more
h
than 24 hours.
h h
m m
h h
m m
m m
h h
Watering cycles will be
h h
activated according to the
selected program.
m m
Watering is suspended un-
h h
til the rainwater in the cup
m m
has evaporated. If the sen-
sor is not tripped again,
h h
the following
m m
cycles will take place as
m m
scheduled according to
h h
the selected programs.
h h
contains Current and following
watering cycles will be sus-
pended until the rainwater
m m
in the cup has evaporated.
h h
If the sensor is not tripped
again, the following water-
(valve
m m
ing cycles will take place as
scheduled according to the
h h
selected programs.
m m
m m
See "Basic troubleshoot-
ing" on page 22.
h h
h h
m m
h h
watering