Immediate Start - claber Dual Select Mode D'emploi

Programming
3. Decide, according to needs or preference, whether the first watering
cycle should start immediately or have a delayed start.

Immediate start

C
A
m
B
fig. 4A
C
A
h
B
fig. 4B
When the watering cycle is finished, the display field "C" (fig. 4B) shows:
- A or B indicating which watering line will be activated next;
- indicating the countodown to the opening of the next watering cycle.
Within 10 seconds of selecting a program,
press the "a-StaRt" button once only to
select line A, or the "B-StaRt" button to
select line B: the message "0 h" will blink
m
3 times, after which automatic watering
h
will start immediately on the selected line.
During the watering cycle, the display field
"C" (fig. 4A) shows:
m - indicating that the watering cycle
h is in progress along with the countdown to
the end of the cycle,
- A or B indicating which watering line
is active.
US
11