Beurer EM 25 Mode D'emploi page 14

• The device is suitable for self-treatment.
• If the device does not work properly, or you feel unwell
or experience pain, stop using it immediately.
• Do not adapt the glute toning device in any way, for
example, by cutting or trimming it. This will produce a
higher current density and can be dangerous.
• Do not use whilst asleep, driving a vehicle or operating
machinery.
• Do not use whilst undertaking any activity where an
unexpected reaction (e.g. strong muscle contractions
even at low intensity) could be dangerous.
• Do not use during strenuous activity (e.g. sport)
• Do not use on wet skin if this reduces the adhesive
capability of the glute toning device.
• Ensure that no metallic objects (e.g. belt buckles) come
into contact with the electrodes during stimulation. If
you are wearing jewellery or have piercings in the area
to be treated, these must be removed before using the
device. Failure to do so could result in spot burns.
• Keep the device away from children.
• Pre-treating the skin with greasy creams or lotions is not
recommended.
• Do not use adhesive tapes, bandages or any aid other
than the designated gel film to apply the glute toning
device to your skin. Otherwise the unequal distribution
of the gel film could lead to skin lesions.
• During the initial few minutes, use the device while
sitting or lying down to minimise the risk of accidental
injuries as a consequence of isolated cases of vagal re-
sponses (feeling of faintness). If you feel faint, switch off
the device immediately, lie down and support the legs in
an elevated position (approx. 5 – 10 min).
Damage
• If the glute toning device is damaged or you have any
doubts, do not use it and contact your retailer or Custo-
mer Services at the address provided.
• Switch the device off immediately if it is faulty or not
working properly.
• Do not attempt to open and/or repair the glute toning
device yourself. Repairs may only be carried out by
Customer Services or authorised retailers. Failure to
comply will result in voiding of the warranty.
• The manufacturer is not liable for damage resulting from
improper or careless use.
Cleaning
• Remove the batteries from the device before cleaning.
• Clean the device after use with a soft, slightly damp
cloth. If they are very dirty, you can also moisten the
cloth with a mild soapy solution.
• Ensure that no water enters the device. If this should
happen, immediately remove the battery and only use
the device again when it has fully dried out.
• Do not use any chemical or abrasive cleaning agents.
Storage
• Re-apply the protective film to the gel film after use.
• If you do not plan to use the device for a long period
of time, we recommend that you store it in the original
packing in a dry environment, ensuring it is not weighed
down by additional items.
14