Establishing A New Reference Weight; Exiting Percent Weighing; Display Hold - OHAUS Scout Pro SPX123 Manuel D'instruction

SCOUT PRO

Establishing a New Reference Weight

Press and hold until % on the display reappears, then release.
Repeat above procedure for new a reference weight.

Exiting Percent Weighing

Press and hold until desired unit is displayed.
Display-Hold
Display-Hold is enabled only when Hold is turned ON in the Mode submenu in the
.S.E.T.U.P. menu. Display-Hold mode captures and stores the highest stable value.
When displayed, the stable icon will blink. NOTE: Units cannot be changed when in
Display-Hold mode.
Place item(s) on platform.
1
EN-19