Guarantee; Reception Of The Goods; Storage; Manipulation - BOMBAS IDEAL GNI Serie Notice D'utilisation Et D'entretien

Bombas Ideal, S.A.

4.- GUARANTEE

Pumps from Bombas Ideal S.A., have a guarantee period of 12 months from delivery date, against any
flaw in materials and manufacture, according to the general sales terms.
Failure to comply with the suggestions and recommendations in this manual, as well as any improper use
or non-authorised handling of the product, will completely invalidate the guarantee.
The guarantee excludes wear and tear through use, improper use, repair or replacement of the faulty part
by the user or by unqualified staff without the express consent of Bombas Ideal S.A.

5.- RECEPTION OF THE GOODS

On reception of the goods please check that:
•
The packaging has not undergone any damage during transport. Otherwise immediately make
the relevant claim to the forwarder.
•
The material supplied coincides with the order specifications.
•
The material has not undergone any damage during transport.
•
The Technical Manual is included with the material.
TAKE NOTE Bombas Ideal S.A. should immediately be informed of any anomaly found

6.- STORAGE

The pumps should be stored in well-ventilated zones free of damp.
For short storage periods the machined parts should be protected with an oil or anti-corrosion product.
If the pump is to be left for longer periods in the store, precautions should be taken to prevent the pump
from corroding by using an anti-corrosion product, also proceeding to cover up the suction and delivery
flanges. Turn the shaft by hand every 15 days to prevent any possible seizing up.
TAKE NOTE Make sure that the diesel engine or electric motor is not exposed to atmospheric
agents not compatible with its degree of protection which might cause damage to this.
Before storing a pump, which has recently been installed, proceed to clean and then air-dry it (do not
used hydrocarbide-based products).

7.- MANIPULATION

For handling the equipment appropriate lifting and transport systems complying with
safety norms should be used. To handle the motor pump set use a sling going under
pump and motor to ensure stability during lifting and displacement.
8