Publicité
Les langues disponibles
Les langues disponibles
A.
2
Install Valve Assembly
Insert spout hose up through hole
A.
in sink. Slide the base then gasket
(1) up over tubes of valve assembly.
Snap the end of spout hose (2)
onto the long quick connect spout
nipple (3) facing front of the valve.
Pull down moderately to ensure
connection has been made. Feed
tubes down through hole in sink
making sure that the gasket is
properly aligned in cavity of base.
4
1-800-345-DELTA (3358)
www.deltafaucet.com
B.
1
3
2
B.
Install mounting bracket (1) & nut (2)
with wrench (3). NOTE: The wrench
provided is designed to be used with
a variety of tools: flat/phillips head
screwdrivers, wrenches, etc.
1
2
3
Publicité
