Cleaning - ELMECO First 1 Class Manuel Pour L'emploi Et L'entretien

All refrigerators are equipped with 2 stickers for each single lid. The stickers must be applied as showed in the
pictures:
First Class can has an accessory called Restriction (pic. 28 pag.82), it is a shaped piece that is applied on the
ending part of the transparent tank outlet. It has the following advantages:
•
The product, liquid (cold drink) or semi-liquid (low density slush), is canalized directly in the glass;
•
The restriction is easy to pull out, therefore, it is possible to easy wash the ending part of the outlet
without having to dismantle the whole transparent tank, with a consequent decrease of the machine
cleaning times.
In summary, the only part, which is not refrigerated, where an accumulation of the product is more likely to
happen, can be now removed and washed.
The gasket (O-ring) on the restriction must be wet with water before inserting it in the tank outlet
terminal. The glass printed on the restriction must face the operator.
Clean the machine before to run it.
Always comply with the provisions of the local authorities in charge regarding the
cleaning of the machine.
Daily clean and sanitize the machine.
Before carrying out whatever operation, switch off the machine (pic. 7 pag.82)
and unplug it.
Use a solution of cold water and sodium hypochlorite (bleach) with a 10 grams
(1/2 spoon) for 1 liter of water ratio. Rinse with lukewarm water.
A greater quantity of beach could damage the material of the auger.
If the plastic parts are washed in the dishwashing machine, verify that the
temperature is not higher than 60°C or 140°F, because they could be damaged.
Do not use any abrasive powder.
Cleaning is very important for the life and maintenance of the machine; we recommend to periodically clean
the parts that are in contact with the product using the following procedure.
Lid stickers
Outlet restriction (optional)

Cleaning

- 25 -