ELMECO First 1 Class Manuel Pour L'emploi Et L'entretien page 26

automatic reset; when the pressures are reduced, the compressor will return to operation and the light
will come ON.
To avoid repeating this situation, make sure that the machine is correctly positioned as shown in pic. 5 pag.82
and/or perform the condenser cleaning procedure described on page 26.
The units First Class 2 and First Class 3, voltage 115Vac/60Hz, are equipped with 4 long legs (4 inches) that
must be installed instead of the shipping legs to meet NFS agency certification. These long legs aren't
adjustable in height.
See procedure supplied with this manual
The ADA handle attaches over the standard handle. No tools are needed to attach the handle.
Punch out the holes located on the back of each tray. Connect the drain hoses.
Long legs (only for 115Vac/60Hz)
Attach the ADA compliant handle (optional)
Connect the drip tray to a drain (optional)
- 24 -