Assembly And Use Of The Nutri Ninja ® Cups - Ninja BL687CO Manuel Du Propriétaire

Assembly and Use of the Nutri Ninja
WARNING: Handle the Pro Extractor Blades
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be damaged or to
shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being
burned.
CAUTION: Remove the Pro Extractor Blades Assembly from the Nutri Ninja cup upon completion of blending. Do not store
ingredients before or after blending them in the cup with the blade assembly attached. Some foods may contain active
ingredients or release gases that will expand if left in a sealed container, resulting in excessive pressure buildup that
can pose a risk of injury. For ingredient storage in the cup, use only Sip & Seal Lid to cover.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 1 Fig. 2
NOTE: Ninja
Kitchen System with Auto-iQ
®
can sense which jar is on the motor base. The available
functions will illuminate depending on which jar is placed
on the motor base. Some settings will not be available for
certain jars.
1
Review warning and caution statements above before
proceeding to number 2.
2
Place the motor base on a clean, dry, level surface such as a
counter or table top. Press down on the motor base to make
sure that the suction cups adhere to the counter or table top.
3 Add ingredients to the Nutri Ninja cup.
4
Place the Pro Extractor Blades
and tightly screw it on clockwise until you have a good
seal. (Fig. 1)
5
Turn the Nutri Ninja cup upside down and place it onto
the motor base, aligning the tabs on the cup with the
motor base. Rotate the Nutri Ninja cup clockwise until
it locks in place, you will hear a click when the lock is
engaged. (Fig. 2)
6
Press the power button on, and select the speed or
Auto-iQ program that suits your needs. The Auto-iQ
program will stop the appliance automatically at the
end of the program. (Fig. 3)
®
Assembly with care, as the blades are sharp.
®
USE
Fig. 3
Total Boost
™
Assembly onto the cup
®
Cups
Fig. 4
7
To pause the appliance, press the selected speed or
Auto-iQ Program a second time.
8
Once you have reached your desired consistency, turn
the power button off. Turn the Nutri Ninja cup counter
clockwise and pull straight up to remove. (Fig. 4, Fig. 5)
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the "Max" liquid line.
9
Turn the cup upright and remove the Pro Extractor
Blades Assembly by twisting the blade assembly
counter clockwise. (Fig. 6)
10 Do not store blended contents with the Pro Extractor
Blade Assembly attached.
11 Place the Sip & Seal
to seal and enjoy!
12 For storage, only use Sip & Seal lid to cover.
13 Be sure to store the Pro Extractor Blades Assembly
attached to an empty cup when not in use.
14 Make sure that the motor base is unplugged when
not in use.
5
To release the motor base from the
counter or table top, place your hands
underneath both sides of the motor
base and gently pull the unit up and
towards you.
REMOVAL
Fig. 5
lid onto the Nutri Ninja cup, twist
®
www.ninjakitchen.com
Fig. 6
14