Ninja BL687CO Manuel Du Propriétaire page 12

Assembly and Use of the Pitcher - cont.
USE
Fig. 7
10 Review warning and caution statements on page 10
before proceeding.
NOTE: Ninja Kitchen System with Auto-iQ
®
Boost can sense which jar is on the motor base. The
available functions will illuminate depending on which
jar is placed on the motor base (Fig. 6). Some settings
will not be available for certain jars.
11 Press the power button to turn on the unit. Select
the speed or Auto-iQ
™
needs. The Auto-iQ
™
automatically at the end of the program. (Fig. 7)
NOTE: Pulse ingredients for even chopping by holding the
Pulse button until your desired consistency is reached.
12 To pause the appliance, press the selected speed or
Auto-iQ Program a second time. (Fig. 8)
™
13 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 8)
14 Turn the pitcher counter clockwise to remove and then
lift off the base. (Fig. 9)
11 1-877-646-5288
Fig. 6
Fig. 8
Total
™
program that best suits your
program will stop the appliance
REMOVAL
Fig. 9
CAUTION: Never insert your hands in the pitcher
as the Stacked Blade Assembly is sharp. Always
use a spatula to dislodge food that has stuck to
the sides of the pitcher.
15 Open the pour spout cap and use the spout to empty
liquid contents.
16 For thicker consistencies, remove the lid and Stacked
Blade Assembly carefully (by its shaft), then empty
contents from the container. To remove the lid, press the
release button on the lid and pull the lid handle up to a
90° angle ands lift the lid off the blender pitcher. (Fig. 10)
17 Make sure that the unit is unplugged when not in use.
18 To release the motor base from the counter or table
top, place your hands underneath both sides of the
motor base and gently pull the unit up and towards you.
(Fig. 11)
Fig. 10
Fig. 11