Ninja BL687CO Manuel Du Propriétaire page 14

Assembly and Use of the Processor Bowl - cont.
USE
Fig. 2
USING THE CHOPPING BLADE ASSEMBLY
1
Review warning and caution statements on page 12 before
proceeding to number 2.
NOTE: Ninja
Kitchen System with Auto-iQ
®
can sense which jar is on the motor base. The available
functions will illuminate depending on which jar is placed on
the motor base. (Fig. 1) Some settings will not be available
for certain jars.
2
Holding the Chopping Blade Assembly by the shaft, place it
onto the gear shaft inside the bowl. Ensure that the Chopping
Blade Assembly fits around the gear shaft and that it is
standing straight. (Fig. 2)
3
Add the ingredients and secure the bowl lid onto the bowl.
(Fig. 2)
4
Plug the power cord into the electrical outlet and press on the
power button ( ). Select the speed or Auto-iQ program that
best suits your needs. Pulse ingredients for even chopping
by holding the Pulse button until your desired consistency is
reached.
NOTE: Please refer to "Speed Settings & Uses" chart for
suggested uses and speeds.
5 When you have reached your desired consistency, stop the
appliance by pressing the power button ( ) and wait for the
blade to stop turning. (Fig. 3)
6 To remove the lid, press the release button on the lid and pull
the lid handle up to a 90° angle. (Fig.3)
7
Turn the bowl counter clockwise and lift it to remove it from
the motor base. (Fig. 4)
8
To release the motor base from the counter or table top, place
your hands underneath both sides of the motor base and
gently pull the unit up and towards you. (Fig. 5)
13 1-877-646-5288
Fig. 1
Fig. 3
Total Boost
™
REMOVAL
Fig. 4
Fig. 5
USING THE DOUGH BLADE ASSEMBLY
1
Review warning and caution statements on page 12 before
proceeding to number 2.
NOTE: Ninja
can sense which jar is on the motor base. The available
functions will illuminate depending on which jar is placed on
the motor base (Fig. 1). Some settings will not be available
for certain jars.
2
Holding the Dough Blade Assembly by the shaft, place it onto
the gear shaft inside the bowl. Ensure that the Dough Blade
Assembly fits around the gear shaft and that it is standing
straight. (Fig. 6)
3
Add the ingredients and secure the bowl lid onto the bowl.
4
Plug the power cord into the electrical outlet and press on the
power button ( ). Select LOW/DOUGH on the control panel
and process until ingredients come together to form a mass.
NOTE: Please refer to "Speed Settings & Uses" chart for
suggested uses and speeds.
5 Once finished making dough, stop the appliance by pressing
the power button ( ) and wait for the blade to stop turning.
6
To remove the lid, press the release button on the lid and pull
the lid handle up to a 90° angle. (Fig. 3)
7
Turn the bowl counter clockwise and lift it to remove it from
the motor base. (Fig. 4)
8
To release the motor base from the counter or table top, place
your hands underneath both sides of the motor base and
gently pull the unit up and towards you. (Fig. 5)
Kitchen System with Auto-iQ
®
USE
Fig. 6
Total Boost
™