Stanley SM16 Mode D'emploi page 25

EC declaration of conformity
MACHINERY DIRECTIVE
SM16 - Mitre Saw
STANLEY declares that these products described under
"technical data" are in compliance with: 2006/42/EC, EN
62841-1: 2015, EN 62841-3-9: 2015+A11:2017.
These products alsoV comply with Directive 2014/30/EU
and 2011/65/EU. For more information, please contact
STANLEY at the following address or refer to the back of
the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
STANLEY.
STANLEY , Europe, Egide Walschaertsstraat14-18,
TWO YEAR WARRANTY
If your STANLEY product becomes defective due to faulty
materials or workmanship within 24 months from the date
of purchase, STANLEY guarantees to replace all defective
parts
free of charge or – at our discretion – replace the unit free
of
charge provided that:
• The product has not been misused and has been used
in accordance with the instruction manual;
• The product has been subject to fair wear and tear;
• Repairs have not been attempted by unauthorized
persons;
• Proof of purchase is produced;
• The STANLEY product is returned complete with all
original components;
• The product hasn't been used for hire purposes.
If you wish to make a claim, contact your seller or check
the location of your nearest authorised STANLEY repair
agent in the STANLEY catalogue or contact your local
STANLEY office at the address indicated in this manual.
A list of authorised STANLEY repair agents and full details
of our after sales service is available on the internet at:
www.2helpU.com
R.Laverick
Engineering Manager
2800 Mechelen, Belgium
04.2019
ENGLISH (
Original Instructions)
25