iRobot Roomba j7 Guide Du Propriétaire page 10

Cleaning the Full Bin Sensors
Remove and empty the bin.
1
2
Wipe the inner sensors with a clean, dry cloth
Wipe the bin door with a clean, dry cloth.
3
Closed Door
4 Clear any debris from the vacuum path.
Opened Door
Cleaning the Multi-Surface Brushes
1
Pinch the brush frame release
tab, lift the tab, and remove any
obstructions.
Remove the brushes from the
2
robot. Remove the brush caps
from the ends of the brushes.
Remove any hair or debris that
has collected beneath the
caps. Reinstall the brush caps.
Remove any hair or debris from
3
the square and hexagonal pegs
on the opposite side of the
brushes.
4 Reinstall the brushes in the robot.
Match the shape of the brush pegs
with the shape of the brush icons in
the cleaning head module.
5
Roomba j7 Owner's Guide
®
EN