Thrustmaster ENZO FERRARI FORCE GT Manuel De L'utilisateur page 2

10 Analog pedal set
11 Pedal connector
12 Pedal cable
13 Adapter connector
14 Power adapter
INSTALLING THE WHEEL
Fixing the wheel in place
1. Place the wheel on a table or other flat surface.
2. Place the clamp screw (18) in the table clamp (17) and then screw the clamping unit into the hole on
the underside of the wheel until firmly fixed in place. Do not turn the screw too tightly, as you risk
damaging the clamping unit and/or the table.
Preparing the wheel
1. Connect the pedal cable (12) to the pedal connector (11).
2. Connect the adapter connector (13) to the power adapter (14) and plug the adapter into an electrical
outlet.
Connecting the wheel
A - To play a standard racing game with your Enzo wheel recognized as a wheel:
1. Switch off your console before connecting the wheel.
2. Connect the GAMEPORT console connector (15) to port 1 of your console and connect the USB
connector (16) to the upper USB port.
3. Set the USB / USB + GAMEPORT switch (9) to the position corresponding to the type of game you will
be playing. (Please refer to the Settings chart provided in the appendix.)
15 Console connector (GAMEPORT)
16 USB connector
17 Table clamp
18 Clamp screw
2/6