Thrustmaster Enzo Ferrari Force GT Guide De Configuration

CONFIGURATION FOR "GRAN TURISMO
1) Installing the wheel:
• Connect your Enzo wheel's USB and Gameport connectors to your PS2 console.
• Set the Enzo's switch to the USB + GAMEPORT position.
• Launch the game. The wheel calibrates itself automatically.
2) Configuring the wheel:
Managing your Enzo wheel's sensitivity
You must enable the exclusive "Precision Drive" mode for maximum playability.
To do so, press the D-pad + Mode button.
Managing your Enzo wheel's sequential gearbox
• By default, your Enzo wheel is configured in the game for "manual gearshift"
mode, allowing you to change gears via the Up/Down levers.
• If you wish to modify this setting, go to Config Gamepad 1P in the game's
Options menu.
Managing acceleration and braking
(Progressive gauges on the lower left part of your screen)
• By default, your Enzo wheel's pedal set is in "Beginner" mode (combined
acceleration and braking axes).
• To switch the pedal set to "Professional" mode (separate acceleration and
braking axes), press the Up Lever + Down Lever + Mode button.
This driving mode is more sensitive, but will allow you to
negotiate turns more efficiently.
(*) Procedure not applicable for first generation's Enzo wheels equipped with Game A/Game B switch.
(**) Configuration to be repeated each time your console restarts
Enzo Ferrari is a trademark of Ferrari S.p.A. used under license. GRAN TURISMO, Playstation and PS2 are trademarks and/or registered trademarks of
Sony Computer Entertainment Inc. Not a product officially licensed nor endorsed by Sony Computer Entertainment Inc.
**
The LED should flash red.
®
4 PS2"
*
**