Fritz! 310 Installation Et Fonctionnement page 3

Security
• Operate the FRITZ!WLAN Repeater
310 in a dry place that is free of
dust , and provide for suffi cient
ventilation.
• FRITZ!WLAN Repeater 310 is intend-
ed for indoor use only. Never let
liquids get inside the housing.
• Insert the the FRITZ!WLAN Repeater
310 into an electrical outlet that is
easy to reach.
• Do not open the FRITZ!WLAN Repeat-
er 310 housing.
• Unplug the FRITZ!WLAN Repeater
310 from the outlet before cleaning.
Buttons
The following functions are set with
the WPS button:
Function Press for
Switch wireless LAN 1 sec.
on and off
Initiate WPS quick
6 sec.
connection
Restore factory
15 sec.
settings
4
LEDs
LED Condition Meaning
fl ashing No connection to the wireless access point / searching
for the wireless access point
on Signal strength
Power fl ashing Restarting the FRITZ!WLAN Repeater.
Updating the fi rmware.
on The FRITZ!WLAN Repeater is ready for operation.
WLAN fl ashing Adopting the wireless LAN settings.
Switching the radio network on or off .
fl ashing fast WPS was aborted; repeat procedure
on The wireless LAN module is ready for operation.
all fl ashing Restoring factory settings
5