Télécharger Imprimer la page

Sharp CD-BA3100H Mode D'emploi page 87

Publicité

Les langues disponibles

Les langues disponibles

„ Removing the transport screw
Before turning the power on, be sure to remove the transport screw on
the back of the unit using a flat-blade screwdriver or a coin.
Note:
This screw is required when transporting the unit again. Please keep it (see page 35).
„ Speaker connection
Main terminals:
Connect the lower black wire to the MAIN (-) terminal and the blue wire to the MAIN
(+) terminal.
Subwoofer terminals:
Connect the upper black wire to the SUBWOOFER (-) terminal and the red wire to
the SUBWOOFER (+) terminal.
Right speaker
Red
Black
Blue
Caution:
z Never mistake the MAIN and the SUBWOOFER termi-
nals. The unit or the speakers may be damaged.
z Only the included speakers should be used with this
product. Do not use other speakers with this unit or
use the supplied speakers with other units.
z Do not mistake the right and the left channels. The
right speaker is the one on the right side when you face
the unit.
z Do not let the bare speaker wires touch each other.
z Do not stand or sit on the speakers. You may be in-
jured.
„ Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75
OHMS socket and position the FM aerial wire
in the direction where the strongest signal
can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP
socket. Position the AM loop aerial for opti-
mum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with
screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause noise pickup.
Left speaker
Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
< Assembling >
External FM aerial:
Use an external FM aerial if you require better reception. Consult your dealer.
„ Connecting the AC power lead
After checking all the connections have been made correctly, plug the AC power lead
of this unit into the wall socket. If you plug the unit first, the unit will enter the demon-
stration mode (see page 10).
Note:
Incorrect
Unplug the unit if it will not be used for a prolonged period of time.
Demonstration mode (See page 10.)
< Attaching to the wall >
Wall
Screws (not supplied)
External FM aerial
ENGLISH
E-9

Publicité

loading