Publicité
Les langues disponibles
Les langues disponibles
„ To automatically play the desired pro-
gramme (EON-PTY)
When the desired type of programme is broadcast, the radio switches to it automati-
cally.
1
Tune in to an RDS station (when a station name is displayed).
2
Press the EON button when "EON" appears.
z "SELECT" and "PTY TI" will appear alternately for about 6 seconds.
z If the EON button is pressed when "EON" is not displayed, "NO EON" will ap-
pear for 5 seconds to indicate that the unit cannot enter the EON stand-by
mode.
3
Whilst they are displayed, select the desired programme type by
pressing the PRESET (
or
The selected programme type will flash.
4
Within 4 seconds, press the PTY.TI SEARCH button.
z The selected programme type and "WAITING" will be displayed for 2 seconds
each.
z "PTY" will appear, and the unit will enter the EON-PTY stand-by mode.
) button.
5
When the specified programme starts on an ON (other network)
station, the unit will automatically switch to the station and "PTY"
will flash.
6
When the programme is over, the unit will automatically return to
the original station.
Checking the stand-by mode setting:
When in the EON stand-by mode, press the EON button. ("Programme type"
"WAITING")
To cancel the EON stand-by mode:
When in the EON stand-by mode, press the EON button. Within 4 seconds, press it
again. ("PTY" will go out.)
About the PTYI (Dynamic PTY Indicator):
"PTYI" (Dynamic PTY Indicator) will appear whilst the Dynamic PTY station is
received. Dynamic PTY indicates that the PTY for the station tuned in, or the PTY ref-
erenced in the EON data, is assessed whenever the programme changes and may
be changed.
PTYI
Lights up
Tuned in to a dynamic PTY station.
Goes out
Tuned in to a static PTY.
Note:
When "PTYI" appears, press the DISPLAY MODE button to check the type of the cur-
rent programme.
Meaning
ENGLISH
E-23
Publicité
