Kärcher K 2 Plus Manuel D'utilisation page 6

ASSEMBLY INSTRUCTIONS
STEP 1:

Insert wheels into the body of the
unit.
STEP 2:

Slide the transport handle into place.
STEP 3:

Install the water inlet connector to the
unit's water inlet.
Note: Never attach the garden hose
connector to the unit's water inlet!
STEP 4:

Pull out the locking slide of the trigger
–
gun handle.
Insert the small end of the high-pres-
–
sure hose into place.
Push the locking slide back into the
–
trigger gun to lock the hose in position.
6 English
OPERATING
INSTRUCTIONS
STEP 1:

Connect the high pressure hose to
the unit's high pressure outlet.
Check the secure connection by pull-
ing on the high-pressure hose.
STEP 2:

Insert the spray wand of your choice
into the trigger gun. Press in against
the spring tension and twist into
locked position.
STEP 3:

1 Screw the supplied garden hose con-
nector on to the end of your garden
hose.
2 Push the garden hose connector on
to the water inlet connector and
make sure you hear it click into place
before proceeding.