BGS technic 9858 Mode D'emploi page 4

USE
High-pressure fuel pump sprocket locking
tool (1), for locking the high-pressure pump
sprocket in setting position.
Auxiliary drive belt tensioner locking pin (2),
for locking the tensioner of the auxiliary
drive belt in the fully retracted position
Crankshaft timing tool (3) (3-pc.),
alignment and locking of the crankshaft in
setting position.
Camshaft locking pin (4),
camshaft sprocket in setting position.
Crankshaft pulley holding tool (5), for holding the flywheel when loosening / tightening the
crankshaft pulley fitting and is installed to the engine from below.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
for
for locking the
5
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
2
3a
3c
4
5
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
1
3b
Insert the tool (5) and
fasten the Screw